Al; Never seem to have much luck with these Canadian Model Numbers, but the Model on this one is CN-33C10....if that helps. Thanks -Ed- teltek@xxxxxxxxxxx -----Original Message----- From: al [SMTP:alleathe@xxxxxxxxxxxxx] Sent: Friday, January 18, 2002 1:02 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Goldstar NC27A Chassis 32" Got a model, I might have notes.Low output on reg should tell you. 6-8 inchers expected,SNOW!! al alleathe@xxxxxxxxxxxxx Al Leatherman Mine Hill, NJ 07803 973-361-5796 ----- Original Message ----- From: "Ed Gaidies" <teltek@xxxxxxxxxxx> To: "Techassist (E-mail)" <techassist@xxxxxxxxxxxxx> Sent: Friday, January 18, 2002 12:15 PM Subject: [TechAssist] Goldstar NC27A Chassis 32" > > Have a Goldstar 32"..In on each side by about 2", retrace and washed out Video. > This chassis uses an STRS6309 for a regulator, and I have no stock. > Is there something besides the regulator that will cause this problem, or will I order the STRS6309. > No hints in Winstips on this. > > TIA > > -Ed- > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.