Have you tested the picture tube? Kevin Wilks Kevin's TV and Video Repair Penticton BC Canada kevinstv@xxxxxxx ----- Original Message ----- From: <harristv50010@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 17, 2002 12:14 PM Subject: [TechAssist] Goldstar Monitor Model# 1465 CA-22 Chassis. Fcc#BEJCH462. Very dim display > I am working on a Goldstar Monitor Model# 1465 CA-22 Chassis. Fcc# BEJCH462 > that has a very dim display. If I connect a pattern generator and adjust G2 I > can get retrace lines. I adjusted G2 so the areas that are supposed to be > black are just barely black the display may be bright enough but it badly > lacks contrast. I do not have the schematic on this unit but the CRT voltages > seem OK. Does anyone have any thoughts on this unit? > > TIA, > Dale > > Dale A. Lubow... HarrisTV50010@xxxxxxx ..515-232-1109..(Fax)515-232-3356 > Harris TV & Appliance..........335 Lincoln > Way.....Ames.....Iowa.....50010-3384 > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/