[TechAssist] Re: GE ctc-175a chassis

  • From: "Wayne Vanaman" <Wayne@xxxxxxxxxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 31 Jan 2003 11:33:25 -0600

We have replaced a couple of sockets that were leaky inside, doing about as
you describe.

Wayne Vanaman
Omega Electronics
6904 W Fairfield Dr
Pensacola, Fl.  32506-3310

Wayne@xxxxxxxxxxxxxxxxxxxxx
WWW.PensacolaTVRepair.Com

850-456-5995 voice
850-458-6369 fax


----- Original Message -----
From: "Alvin Rose" <arose@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, January 31, 2003 3:33 PM
Subject: [TechAssist] GE ctc-175a chassis


>
> Hi Guys
> We have a CTC-175a chassis which comes on ok first but
> then the screen goes dark..Screen voltage drops from 335
> down to 65 volts..changed the 1000  HV cap on crt board.
> No change..Remove crt from socket and voltage goes back to
> 400 volts  plug it back on and it wotks for a short time and then
>
> goes dark again.. Hi voltage is 21 kv and does not change.
> Suspect Crt..any suggestions appreciated
> Alvin Rose
> Radio & Tv Centre
> Marystown, Nl
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
>
>

------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html

Other related posts: