[TechAssist] Re: GE MODEL F27443 Chassis ATC-113BA1
- From: "David Lessard" <mr_fixit@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 6 Jul 2004 16:42:33 +0100
I had one just the other day. If you have measured the resistance of
that Q14401 (horizontal transistor), it is shorted hence the chirping
power supply. What blew this transistor was the bad solder joint on the
L14401 a ferrite rod wrapped with wire (coil) because of glue. Remove
that
L14401 and clean glue off, unplug one hole clogged with glue.
Reinstall coil and new horizontal transistor, which should do it.
David Lessard
Alexandria, Ontario
mr_fixit@xxxxxxxxxxxx
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Intrepid Video
Support
Sent: Tuesday, July 06, 2004 9:31 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: GE MODEL F27443 Chassis ATC-113BA1
Alvin,
You have to remove the coil, clean the leads and resolder it.
These leads are real thin and the solder does not adhere to it very
well.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Alvin Rose" <ajroseca@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, July 06, 2004 5:50 PM
Subject: [TechAssist] Re: GE MODEL F27443 Chassis ATC-113BA1
Hi Jeff
I checked the L14401 coil and it looks ok with no
breaks in the board but I will solder it again to make sure.
Thanks your help is appreciated.
Intrepid Video Support wrote:
>Alvin,
>Resolder your L14401 off base of HOT.
>Jeff
>--
>Intrepid Video TV/VCR Repair
>263 S Front St, Steelton PA 17113
>717-939-7708; (F) 717-564-4952
>www.intrepid-video.com www.tech-repair.net
>----- Original Message -----
>From: "Alvin Rose" <ajroseca@xxxxxxxxxxxxxxx>
>To: "techassist" <techassist@xxxxxxxxxxxxxx>
>Sent: Monday, July 05, 2004 7:15 PM
>Subject: [TechAssist] GE MODEL F27443 Chassis ATC-113BA1
>
>
>Hi Guys
>We have a GE F27443 Model color tv with a defective flyback
>which we replaced..The set is very difficult to turn on and sometimes
>the on off button has to be pushed 10 times or more before it comes on.
>When it comes on it seems to be working ok..Current consumption is
>normal on the isolated power supply and all functions are working..
>Checked the on off switch ..checks ok..can find no breaks in the
circuit
>board..Any suggestions or help would be appreciated
>Alvin Rose
>Radio & TV Centre
>Marystown, Nl.
>
>
>-----------------------------------------------------------------------
------
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
>
>
>
>-----------------------------------------------------------------------
------
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
>
>
>
------------------------------------------------------------------------
-----
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
------------------------------------------------------------------------
-----
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
