If you did,,can you let me know which catalog and which page (if possible). i did look through MCM but maybe I missed it or it was an earlier catalog Clancy Harms wrote: >I saw them in the MCM catalogue >HTH > >Clancy Harms NESDA's Region 7 Director >Dick's Radio & TV, Inc. >2319 West Clay St. If it's broken...a real man can >St. Charles, MO. 63301 can break it even better ! >(636)-724-5055 >(636)-724-5531 fax >email: dickstv1@xxxxxxxxxxxxx >mailto:dickstv1@xxxxxxxxxxxxx >----- Original Message ----- >From: "Ralph Dorsey" <Merlin-Wizard@xxxxxxxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Tuesday, February 05, 2002 6:39 PM >Subject: [TechAssist] Re: [Fwd: Magnavox PTV model RK8548 need chassis# >please] > > >>This brings up something I hope someone can help me with. Does anyone >>know where to get the bleeder feedback device that's mounted on the >>deflection panel between two heat sinks attached by two screws through >>two plastic isolation pieces one on each side. It's marked with a >>"Sanyo" number of something like 230340-3 or 230340-4 or something like >>that. It goes between the flyback and the high voltage splitter and has >>a green wire that attaches to the board near the flyback. It's used in >>these chassis's and versions near it like the PTV360 and others. I >>thought I saw them in some catalog, but i've looked for a week and can't >>seem to find it. >> >>Fuzz wrote: >> >>>PTV-365 Manual 7488 >>>fuzz >>>----- Original Message ----- >>>From: "Phil Bader" <philbad@xxxxxxxxxx> >>>To: <techassist@xxxxxxxxxxxxx> >>>Sent: Tuesday, February 05, 2002 7:49 AM >>>Subject: [TechAssist] [Fwd: Magnavox PTV model RK8548 need chassis# >>>please] >>> >>> >>> >>> >>> >>>-------- Original Message -------- >>>Subject: Magnavox PTV model RK8548 need chassis# please >>>Date: Mon, 04 Feb 2002 14:50:50 -0500 >>>From: Phil Bader <philbad@xxxxxxxxxx> >>>Organization: Jan Phyl TV Inc. Winter Haven, Fl. Est.1976.vioce/fax >>>863-299-8821 >>> >>>Electric co's transformer blew,power lost.Now has sound,no >>>picture(black) I need the chassis# to research before going out.Thanks >>>------------------------------------------ >>>Make your TechAssist database better! >>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>>------------------------------------------ >>>To UNSUBSCRIBE your email address, click here: >>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>>Or send a BLANK email with unsubscribe in the >>>SUBJECT field to the address above. >>> >>> >>> >>>------------------------------------------ >>>Make your TechAssist database better! >>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>>------------------------------------------ >>>To UNSUBSCRIBE your email address, click here: >>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>>Or send a BLANK email with unsubscribe in the >>>SUBJECT field to the address above. >>> >>> >> >>------------------------------------------ >>Make your TechAssist database better! >>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>------------------------------------------ >>To UNSUBSCRIBE your email address, click here: >>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>Or send a BLANK email with unsubscribe in the >>SUBJECT field to the address above. >> > >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.