[TechAssist] Re: Fw: NON TECH!!! Why Al Leatherman shoud retire soon
- From: Eric Manuel <tvman@xxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 06 Apr 2005 17:48:30 -0230
Hi Al have you got the home picked out yet..Eric
Eric
E M Electronics
Deer Lake Nfld
Canada
tvman@xxxxxxxxxxxxxxx
Al L wrote:
>
>
>>CTC170! I replaced Q2502 for no vertical, after applying the usual pound
>>of solder,still no VD.
>> I spent about 7 hours over the next two days checking and
>>analyzing,finding no vertical drive.FINALLY I checked the voltages on the
>>ramp driver,very wrong,and THEN I discovered the blind tech(with
>>magnifiers) had failed to solder the emitter of Q2502 to the foil!
>>Soldered it and it works.
>> A certain CET and CSM from Florida and Ohio are correct,STAY AWAY FROM
>>CTC170 RCA's!
>>I will now put ctc170 officially on my crap list!
>> Thanks for the service notes,guys! BTW, it came in dead,so I am not
>>totaly stupid! al
>>
>>Al Leatherman
>>224 RT. 46
>>Mine Hill, NJ 07803
>>973-361-5796
>>WWW.ALS-TV.NET
>>
>
>
>
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
