[TechAssist] Re: Funai combo tvs, shutdown
- From: "LeRoy Westlund" <llw@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 28 Jun 2005 23:04:26 -0600
Yes, Larry.
I have done this before.
Take the deck out,...and chuck it.
Remove BOTH end sensors, and put wire shorts in thier place.
Then remove, and wire the mode switch to the stop, or eject position.
It's just a matter of fooling the micro-p into thinking the deck and basket
are still in the set, and in position.
HTH,
LLW
LeRoy Westlund
Westlund TV & Electronics
97 North Main " I forgot,..to remember,..
Centerfield, UT 84622-0087 to forget "
Ph./Fax 435-528-3822
mailto:LLW@xxxxxxxxxx
-----Original Message-----
From: Larry <schntv@xxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Tuesday, June 28, 2005 1:37 PM
Subject: [TechAssist] Funai combo tvs, shutdown
>is there a way to bypass the vcr deck??
>set plays good for 30 seconds then goes off.
>the deck has mechanical problems, c it be bypassed
>electrically, so the tv will play.?
>Larry
>
>--
>Schneider TV & Electronic Inc.
>5415 N. Wooster ave.
>Dover, Ohio 44622 www.geocities.com/schntv2000/
>330-343-0768 FCC. first class & Extra class K8WLY
>---------------------------------------------------------------------------
--
>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>Set Vacation
mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
