Hi Im sorry but you are in the wrong site you have to jtag it to bring it back alive don't touch anything in there it just have the memory corrupted and jtag is the solution for this problem im sorry but i can't give you more info good luck : Manuel --- "Perry Alevras ( AVT )" <palevaras@xxxxxxxxxxx> wrote: > > > I have this unit in repair for no display.This > thing was manufactured in Shenzhen China.Can't > locate whole seller or service literature. > I found a model number of WT-1303D.I repaired the > power supply by the seat of my pants replacing a > regulator IC and two diodes.Output voltages seem > to be there.I have the 3.3V for the display but,no > > display.There is a display driver IC on that PCB. > P/N HC164.This is a 14 pin SMD.Need a source for > him > or the unit.Any insight would help. > > Thanks,Perry > AVT Dallas,TX. > 214-728-6526 > > > Perry Alevras AVT > ----------------------------------------------------------------------------- > Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and > select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > Manuel Orion TV Repair (323)807-9876 Los Angeles CA 90001 ----------------------------------------------------------------------------- Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/