In a message dated 2/8/2002 3:06:15 PM Eastern Standard Time, MagLfixIt4ya@xxxxxxx writes: > Subj:[TechAssist] Re: Sony KV20EXR20 IC651 runs too hot > Date:2/8/2002 3:06:15 PM Eastern Standard Time > From:<A HREF="mailto:MagLfixIt4ya@xxxxxxx";>MagLfixIt4ya@xxxxxxx</A> > Reply-to:<A > HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A> > To:<A HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A> > Sent from the Internet > > Thank you Jeff, the set has been playing for a good 3 hrs now, I believe it > was the cap near the hybird, I did solder around the area too and replaced > a few caps near the IHVT. Don > > In a message dated 2/8/2002 10:37:09 AM Eastern Standard Time, > jstielau@xxxxxxxx writes: > Thank you Jeff, I will check that, I knew they run hot but this seemed > excessive > > > Subj:[TechAssist] Re: Sony KV20EXR20 IC651 runs too hot > > Date:2/8/2002 10:37:09 AM Eastern Standard Time > > From:<A HREF="mailto:jstielau@xxxxxxxx";>jstielau@xxxxxxxx</A> > > Reply-to:<A > > HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A> > > To:<A HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A> > > Sent from the Internet > > > > > > > > > > Don, > > > > It is normal for these to run searing hot ! Your shutdown problem may be > > else where. As long as the B+ is stable from the STR circuit , it should > > > be > > OK. > > > > Double check the main board for poor connections on all the heatsinked > > devices & TO220 type cases. > > > > Check electrolytics around the hybrid shutdown IC ( The stand up greenish > > IC near the H-sweep circuit) > > > > Jeff Stielau > > Shoreline Electronics Repair > > 125 Beech Tree Lane > > Westbrook, CT 06498 > > 860-399-1861 > > 860-664-3535 (fax) > > ----- Original Message ----- > > From: <MagLfixIt4ya@xxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Friday, February 08, 2002 10:04 AM > > Subject: [TechAssist] Sony KV20EXR20 IC651 runs too hot > > > > > > > > > > Hello all, IC651 STRS6301 (no suffix "A") gets way too hot, after only > 10 > > min > > > of play the heatsink cannot even be touched and the set intermittently > > shuts > > > down, it may take minutes, may take hours or even days but it will shut > > down, > > > I replaced it along with all the electrolytic caps on that board and > > Q611, > > > same thing, B+ is normal and steady, I have no print so Im not sure of > > the > > > other outputs, anyone have past experience with wht might be causing > > this? > > > Any help is appreciated. > > > Don from Affordable Electronics > > > 153 Garfield Place > > > Brooklyn, NY 11215 > > > 718-788-0384 > > > 718-788-2326 fax > > > ------------------------------------------ > > > Make your TechAssist database better! > > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > Or send a BLANK email with unsubscribe in the > > > SUBJECT field to the address above. > > > > > > > > > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.