[TechAssist] Re: Fixed Mitsubishi PIP by-pass for CK35MX2 PIP 930B552C
- From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 1 Feb 2002 10:04:17 -0500
Paul,
If you plug the caps into the VP socket you might want to tin the leads with
solder to make the fit tighter. We had a few recalls early on in our
experience with these bypasses done this way. Now we take the old modules,
rebuild the ones that are not too damaged and pull the VP connector off of
the bad ones. We solder the caps to the connector and keep them ready to go
for a quick reliable fix.
Leonard G. Caillouet
Service Manager
Electronics World
Gainesville, FL
352-332-5608
352-332-5668 (fax)
----- Original Message -----
From: "C&W Electronics" <c_w_electronics@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, January 31, 2002 6:36 PM
Subject: [TechAssist] Re: Fixed Mitsubishi PIP by-pass for CK35MX2 PIP
930B552C
>
> The proper by-pass for this PIP is: 4.7uf @ 35-50v, (+)pin 5, (-)pin 11,
.01
> between pin 7-9, both caps on VP socket. Works great. Caps can be plugged
> into the socket from the top.
>
> Thanks to all who replied.
>
> Paul W
> C&W Electronics
>
>
> From: "C&W Electronics" <c_w_electronics@xxxxxxxxxxx>
> Reply-To: techassist@xxxxxxxxxxxxx
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Mitsubishi PIP by-pass for CK35MX2 PIP 930B552C
> Date: Wed, 30 Jan 2002 21:21:16 -0600
>
>
> Does the 47ufd/50v np cap(pin 5-11)work, to bypass the PIP on this set. Or
> is there some other method to bypass the PIP in the later model sets?
Please
> let me know.
> The PIP board is very expensive and from what I understand, it may be
> re-built, even from Mitsubishi. Of course I can rebuild this one, but the
> customer doesn't care if it has PIP.(they had forgotten that the set had
> this feature)
> Thanks for any advice.
> Paul W
> C&W Electronics
>
>
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
>
>
> _________________________________________________________________
> Chat with friends online, try MSN Messenger: http://messenger.msn.com
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
