Wayne; If this would have been a Mits, first thing that I would point to. PIP. -Ed- ----- Original Message ----- From: "Wayne Vanaman" <Wayne@xxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 22, 2002 9:17 AM Subject: [TechAssist] Fixed: Magnavox 27a5 rolls > > Greetings all: > > TV > Model: Magnavox cp4764a401 > Chassis: 27a502-00aa > > Symptom: > Rolls vertically, any input. OSD is stable > > Fix: > C200 on the PIP board. > > The gruesome details: > > Changed jungle IC200 LA7672, no help. > Changed the vertical IC, LA7838 (just cause I had one). > > Sync the scope on field one of the jungle ic video det output pin, P44. > Scope pin 28, vertical output, and watch it roll. Back to IC200p29 and the > signal is in sync. > > Curiously the set will sync if I input a green field. > > Voltages measured very close to those in the manual (SAMs 3534) > Finally I realized that the Amplitude of the input at ic200p29 was low, and > tracked it back to the PIP module. > > Because the LA7672 jungle IC is used in other sets this could be a problem > for them also. > > > Wayne Vanaman > Omega Electronics > 6904 W Fairfield Dr > Pensacola, FL 32506-3310 > > 850-456-5995 voice > 850-458-6369 fax > > Wayne@xxxxxxxxxxxxxxxxxxxxx > www.PensacolaTVRepair.Com > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/