Bob, Bob Waterman sent a suggestion like that and it fixed the proplem. R007, 5.6 ohm, 2w was open. I copied that post and included it below. Have had several other suggestions from the group, so I send this to the group. Thanks to all, Ken Ken Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice) 850-932-0819 (Fax) ----copied from 12/3/03---------- Bob, C458 is a 3300@25. Saw that in Winstips. Sure they meant C428. However, R007 was open. Replacement cured problem. Thanks very much. Ken Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice) 850-932-0819 (Fax) On Wed, 3 Dec 2003 16:55:03 -0500 "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx> writes: > Ken, > See if that set has a C458 (1mfd/160V) in the horizontal and an R007 > (5.6 > ohm, 2w) in the regulator circuit. If so, try replacing the cap and > checking > that resistor. What does the B+ measure and does it fluctuate? I do > not have > a manual either. > > Bob Waterman, CET® #RI-28 > Master Technician License #9109 > Service Manager / Parts Manager > Gemini Computer, TV, & Security Alarms > (508)695-7302 > (508)695-7769 FAX > geminitv@xxxxxxxxxxxxxxxx > geminitv@xxxxxxx > www.geminicomputertvsecurityalarms.com > -------end of copy from 12/3/03-------------- On Thu, 4 Dec 2003 16:06:55 -0500 "Bob@Bobs tv" <woodman1@xxxxxxxx> writes: > Ken, > There is a resistor that opens, sorry no notes on this. All I > can > remember is its on the right side near front. It was larger one > maybe a 2W, > just keep looking had same problem reg output then bar... > Bob, > > Bobs TV Worcester, ma > > woodman1@xxxxxxxx > > Main 508-853-1482 > Fax 508-853-1480 > ----- Original Message ----- > From: <gulftech@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, December 03, 2003 4:42 PM > Subject: [TechAssist] Fisher TV PC3525, Does not fill screen > > > > Techs, > > > > This set came in with a shorted HOT/Q402. Replaced w/ original > 2SD1879 > > and caps C428/1ufd, 160v and C007/4.7ufd, 160v. Set plays, but > does not > > quite fill screen on right side. Shows up more when channel is > changed. > > Replaced regulator STR30130. No change. No print. Need help. > > > > TIA, > > > > > > Ken Smith > > Gulf Technical Services > > 3034 Gulf Breeze Parkway > > Gulf Breeze, FL 32563 > > 850-934-8324 (Voice) 850-932-0819 (Fax) > > > > > > ________________________________________________________________ > > The best thing to hit the internet in years - Juno SpeedBand! > > Surf the web up to FIVE TIMES FASTER! > > Only $14.95/ month - visit www.juno.com to sign up today! > > > ************************************************************************* *** > * > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > ************************************************************************* **** > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/