This set shuts back down in a few seconds. Found the output of the run 9volt reg. IC341 at .2volts. Traced it to a shorted Q341 and a burned R341. Burned too bad to read and too small to scrape. The ouput leg of the reg. is still 10ohms off ground even after changing Q341. If someone can get as far as the value of R341, maybe you could explain Q341's function. Having to trace point to point and starting to go blind. This set is similar to the early to mid 90's Sanyo AVMxxxx series. Thanks. Terry H. The TV Shop 315C St. George St. Gonzales, Tx. 78629 830-672-7403 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/