VSIZ adjustment in service menu worked but at maximum setting (63) , size was still a couple inches short. Found R311 1ohm 2watt had increased to 1.9 ohms. Located off pin 7 of IC301 on the pump up line. Apparently this value is very critical ================================= Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 (860)399-1861 (860)664-3535 FAX jstielau@xxxxxxxx ================================= ----- Original Message ----- From: "Shoreline Electronics" <jstielau@xxxxxxxx> To: "Tech Assist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 12, 2004 2:02 PM Subject: [TechAssist] Sony KV20VS40 Reduced Vertical > Make : Sony > Model : KV20VS40 TV/VCR Combo ( Base model KV13VM40) > Problem : Reduced vertical deflection , missing a few inches on the top > and > bottom > > Problem occurs even with VSIZ maxxed out. Changed IC301 ( TA8403K) and > verified proper 26V B+ supply. Checked poly caps on the v drive line and > electrolytics. > > Size does respond when adjusting the VSIZ but not enough to fill the > screen. > > Anyone encountered this on these Sony combos? > > ================================= > Jeff Stielau > Shoreline Electronics Repair > 344 East Main Street > Clinton,CT 06413 > (860)399-1861 > (860)664-3535 FAX > jstielau@xxxxxxxx > ================================= > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/