Removed lead from flyback to the HV splitter, inserted end in glass bottle to insulate.Powers up OK with HV. Bad HV splitter # 205064. The lead releases from the splitter by gently bending back the square plastic tab where lead goes into block.Comes right out. Phil Bader Phil Bader wrote: > > Customer said just went dead while viewing video game. Power on, three > tries then dead.Carried chassis to shop. Power on with remote, can hear > the HV chirp three times trying to start up but never does. > I checked the two power transistors on main board "Q4401" and "Q4101" > both of which are not shorted.Collectors good diode action to ground. > Not completely familiar with this chassis. > Phil Bader > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: philbad@xxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: philbad@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/