Phil did you scope the 95V to see if it's clean. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "Phil Bader" <philbad@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, September 09, 2002 6:45 PM Subject: [TechAssist] F27318, CTC203AA5.no power on,5V stby OK, +139V source low] > > > > > Dead. plug in, hear the chirp of the smps starting. The main regulated > source that goes to the fly/HOT in standby is low: +96VDC instead of > the typical +139VDC. I isolated the fly input.Same, so HV area not > loading it. Changed every transistor in the smps with OEM.No help. It > did have one resistor in the smps open: R14107 (43 ohm,1/4W # 244214). > Replaced it.Push power and nothing.I find good +5V stby,tho. Changed the > opto-iso IC U14101. Still dead. > Wonder what is causing this lower than normal 139 source to be 95V and > unresponsive to turn on. The other shop said he swapped the gemstar > board before the tech-friend carried it to me. Need input! arggh. > Phil Bader > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: philbad@xxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/