Hi Junior, what voltage are you running on the HOT col when just plugged in without trying to turn on? Dave Routson (Dave's TV) ----- Original Message ----- From: "Junior E Hurdle" <jselectronics@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 06, 2002 7:08 AM Subject: [TechAssist] Re: Dead rca CTC169CA2 model# g27220tn > > ----- Original Message ----- > From: Junior E Hurdle > To: techassist@xxxxxxxxxxxxx > Sent: Monday, February 04, 2002 3:28 AM > Subject: Dead rca CTC169CA2 model# g27220tn > > > Hi techs > I am working on this Rca tv which had a shorted hz output. I have replaced the hz op but the set is still dead. > Q4301 (the on/off switch) is giving me a reading of 0.2v when i press the power switch. > also at the reg transistor (Q4101) I am reading 157V at collector and 0V at base and emitter. > also should'nt there be a horizontal vcc present on ic U1001 or evan the usual 9v that supplies this ic ? > Please Help > Thankyou > Junior. > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.