Hi This set was first shutting down at turn-on.When I unplugged the yoke(samsung DID-1492FL) it did not shut down.When it was plugged back in the set remained on.The raster concaved a bit on both sides.Also the flyback(154-138G) was getting hot and the pump-up diode D443 was melting the solder on its leads.So I replaced the FB.The set continued to shut down with the yoke in,further troubleshooting showwed up a bad R411(6.8K) and TA7644BP.The set continued to shut down so I tried a new yoke but the image is still concaved on both sides.This yoke is a DIE-1992GL. ===== __________________________________________________ Do You Yahoo!? Yahoo! Greetings - Send FREE e-cards for every occasion! http://greetings.yahoo.com ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.