open chipper check software and look under the Help section then under the program help and choose the chassis. it will show you how to setup for the CTC175/6/7 Jason Mouton's Electronics ----- Original Message ----- From: "walter wood" <wwood_38478@xxxxxxxxx> To: "Tech Assist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, January 28, 2003 10:54 AM Subject: [TechAssist] Chipper Check, and the CTC175/176/177 etc. > > I believe that the gentleman that had the hookup > for re initializing the eeproms for these sets, OUT > of the set, was on this list. > I lost that post, and would really like to get that > info back. > Thanks > Walter > > ===== > Walter Wood > Future Tech Home Center > 2786 Hwy. 43 N. > Lawrenceburg Tn. 38464 > 931-829-3337 > Fax 931-829-4044 > mailto:wwood_38478@xxxxxxxxx > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html