MCM has original JVC fuse lamps.. 12V 150 ma part number 32-6950 Jerry Hoeme Jerry's TV Service Liberal, KS 67901 jhoeme@xxxxxxxx ----- Original Message ----- From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 20, 2002 4:30 PM Subject: [TechAssist] |Can LEDs be used in place of fuse lamps - see prev question Can leds be used in place of these lamps - any special considerations if this is the case? PREVIOUS QUESTION WAS: I have a problem with a "fairly old" amplifier (Realistic STA-16B) It has 8 > ohm speakers and 150W output. The four 'light display "fuses?"' are blown. (will not work without these). They are (X3) 12V, in > series, at 0.25A and one at 6V at 1.5A. They are 30mm in length and are > glass fuses - nothing else written on them. Any help where I can get > replacements. I know it is a bit of a long-winded question but would really > appreciate some help here. > Thanks again babalino Mr D Graham Grahams Electronics 978 Walker Road Newcastle upon Tyne England ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ --- [This E-mail scanned for viruses] --- [This E-mail scanned for viruses] ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/