[TechAssist] Re: CTC-185 No low band

  • From: Gary McCartney <number63@xxxxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Fri, 08 Feb 2002 15:31:20 -0500

I had the same problem on a CTC177 and it turned out to be the VHF RF
amplifier transistor. It was a surface mount device. The RCA part number
is 200566. Don't know if it would be the same part in CTC185.


Gary McCartney

McCartney Electronics
7134 Fife Rd, RR 7
Guelph Ontario Canada N1H 6J4
Fax: (519)821-1530
email: number63@xxxxxxxxxxxxx




Webster TV wrote:
> 
> Keith,
> Don't have any tips on tuner problems in CTC185's written down. Did have
> this one from a CTC175-- No VHF, UHF o.k.--found shorted transister Q7404(rf
> switch) printed circuit mount under tuner shield. Don't know if this will be
> of any help or not?
> 
>                                  Dan Webster
>                                  Webster's TV
>                                  Shullsburg, Wi.
> ----- Original Message -----
> From: Keith Trumbla <ktrumbla@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, February 08, 2002 5:43 PM
> Subject: [TechAssist] CTC-185 No low band
> 
> >
> > I have a CTC-185 that has no RF function on the VHF band (Ch 2-49) UHF
> band;
> > CH 50 & up are OK. Tried the 4 pin VHF amp and OSC/Mixer IC. Did the
> solder
> > too, even checked all paths with ohm meter to make sure. HELP !
> >
> >
> >
> > Keith Trumbla
> > O/O B.E.M Electronics  Est.1954
> > 839 Ellice ave.
> > Winnipeg Manitoba, Canada  R3G 0C3
> > Ph.(204)775-2875 Fax(204) 774-9192
> > Mail to : ktrumbla@xxxxxxxxxxx
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
> http://explorer.msn.com/intl.asp.
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> 
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.

--
------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: