if you can see OSD(if not turn up G2 a bit), on the Video Menu page,Reset picture controls. If this fixes your picture,you may need to replace the EEprom Peggs At 09:07 AM 3/12/04, Hoyt's TV wrote: >I have an RCA CTC177AG that has low/no video. > >Looks good going into the jungle chip but on the RGB outputs where the >blanking pulse is negative, the video is about half what it should be and >high up on the blanking pulse which explains the way it looks on the screen >but there are so many things outside the chip that could cause this I would >like to know if anyone has seen this and knows of a likely cause. > > >Russ Hoyt >Hoyt's TV >Exeter, NH > > > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/