[TechAssist] Re: CTC177 Shuts down (EPROM??)

  • From: "Ralph Dorsey Atlas TV Milwaukee, WI" <Merlin-Wizard@xxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Wed, 27 Mar 2002 21:24:30 -0600


Also make sure and check the jumper that is right off the HOT base and 
goes to the trace,,that goes to the horz driver transformer.

Ralph Dorsey
Atlas TV Inc.
3945 s 76th St.
Milwaukee.Wi 53220
414-545-2303



repair1 wrote:

>Bill you probably have fauly connections on horiz drive transformer, it is
>somewhat common, hth
>charles betzler
>Best Electronics
>repair1@xxxxxxxxxxxxx
>
>----- Original Message -----
>From: "Bil Green" <tv.vcrrepair@xxxxxxxxxxx>
>To: ".Techassist" <techassist@xxxxxxxxxxxxx>
>Sent: Tuesday, March 26, 2002 5:26 AM
>Subject: [TechAssist] CTC177 Shuts down (EPROM??)
>
>
>>GE 25GT506
>>Chassis CTC177
>>25" TV
>>
>>The set shuts down after a while
>>150V at HOT
>>17V source o.k.
>>5V at EPROM
>>
>>I already soldered up the tuner and CPU shield grounds (no help)
>>
>>I though that the EPROM may be intermittent since the customer
>>says that the picture was getting smaller and then later the set
>>started shutting down.
>>
>>EPROMS become corrupt when people don't get their GE's and
>>RCA's fixed when the grounds are bad and intermittent problems
>>occur.
>>
>>Thanks,
>>
>>Bil
>>
>>------------------------------------------
>>Make your TechAssist database better!
>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>>------------------------------------------
>>To UNSUBSCRIBE your email address, click here:
>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>>Or send a BLANK email with unsubscribe in the
>>SUBJECT field to the address above.
>>
>
>------------------------------------------
>Make your TechAssist database better!  
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
>

-- 




------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: