[TechAssist] Re: CTC169 - Melted Chocolate looking drops in P-I-P
- From: Ralph Dorsey <Merlin-Wizard@xxxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 15 Feb 2002 06:23:10 -0600
It's caused by the caps leaking on the board. The leaking electrolytic
chemical reacts with the brown bumpers and "melts" them along with
traces on the board. Clean thoroughly with acetone, change the bad caps
and repair any damaged traces. Should work
Philstv@xxxxxxx wrote:
>Somebody posted a fix to this list some time ago about this problem. Could I
>see it again?
>
>Phil - www.philstv.com
>http://members.aol.com/philstv/
>34651 Ford Road
>Westland, MI 48185
>734-728-5925
>philstv@xxxxxxx
>
>
>
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
