[TechAssist] Re: CTC chassis Q903
- From: "Maxwell Bailes Jr." <bailes4@xxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 14 Sep 2001 20:59:30 -0700 (PDT)
--- GJCHAMBERS <gjchambers@xxxxxxxxxxx> wrote:
> Hello,
I believe you should try the eeprom,I've had a few and
it fixed them. Good Luck
Max
> i dont see the actual chassis number, justs ctc....
> on the ctc 175-186 models, this has been
> successfull, or you can replace the
> eprom as well as i have found it to be the orig
> cause. all functions will
> work,even muting between channels. im not sure the
> exact chassis number you
> have, if not these disregard this info,
> gary
> ----- Original Message -----
> From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, September 14, 2001 6:00 PM
> Subject: [TechAssist] Re: CTC chassis Q903
>
>
> >
> > If the audio is turned way up and the set turned
> off and back on it may
> open
> > up the speaker. I've had two of these ctc's do
> that.
> > Phillip R Hull
> > phil245@xxxxxxxxxxxxx
> > ----- Original Message -----
> > From: "Robert Herring" <supertek66@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Friday, September 14, 2001 4:40 PM
> > Subject: [TechAssist] Re: CTC chassis Q903
> >
> >
> > >
> > > Normal remote mute operation will work
> > > however muting when power up or channel change
> will not, so there may be
> a
> > > popping sound when selecting channels or when
> power up.
> > > Most customers won't even notice
> > > Robert
> > > supertek66@xxxxxxxxxxx
> > > robert_herring@xxxxxxxx
> > > H&H Electronics Inc
> > > Dallas,Tx. 75233
> > > ----- Original Message -----
> > > From: <Tvcr9@xxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Friday, September 14, 2001 10:03 AM
> > > Subject: [TechAssist] CTC chassis Q903
> > >
> > >
> > > >
> > > >
> > > > If this mute transistor is removed to bring
> back audio, would we lose
> > the
> > > > MUTE function ? Does removing this transistor
> cause any problems or
> > > > inconveniences as far as operation is
> concerned ? Thank you
> > > >
> > > > Bill
> > > > Help make your TechAssist online repair tips
> > > > database better! Submit your fixes here:
> > > >
> http://www.circuitwork.com/techassist/tip/#tips
> > > > To unsubscribe write to:
> > > > techassist-request@xxxxxxxxxxxxx
> > > > with unsubscribe in the subject line.
> > > >
> > > Help make your TechAssist online repair tips
> > > database better! Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with unsubscribe in the subject line.
> > >
> > >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
