[TechAssist] ADDITIONS: RCA PPR 400 P (VP6X Power Sub PCB)

From: "David Eugene Waybright" <David@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Date: Sat, 30 Aug 2003 23:18:21 -0400

If someone could also be helpful by providing a scan of the TOC & index
(if it contains them) from the Service Manual it would be nice also. 
 

Thanks again,

 

David Waybright

David@xxxxxxxxx

A+ & NET+ Computer Technician

 

-----Original Message-----
From: David Eugene Waybright [mailto:David@xxxxxxxxx] 
Sent: Saturday, August 30, 2003 11:11 PM
To: 'techassist@xxxxxxxxxxxxx'
Subject: RCA PPR 400 P (VP6X Power Sub PCB)

 

I have a cracked board on a:

Name:               RCA ColorTrak 40" Projection Color TV

Model #:            PPR 400 P

Chassis #:         VP6X solid state, unitized

 

I inherited this unit and looked it over to see if anything was wrong
before I fired it up.  I inspected the unit board by board and the only
things I found wrong was that the antifreeze was low in the green tube
and the VP6X Power Sub PCB has a crack in it.  I went ahead and soldered
jumper wires across the crack and checked all the fuses to see if that
was the only problem and it fired right up without a hitch.  I was
surprised to find no fuses blown before or after firing it up.

 

I would like to know if anyone could tell me where I can find a
replacement VP6X Power Sub PCB to replace the cracked one.

 

Thanks in advance,

 

David Waybright

David@xxxxxxxxx

A+ & NET+ Computer Technician

 



*****************************************************************************
Classifieds! Buy or Sell!
http://sell.tech-assist.org
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.htm
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.htm
Lost Password:
http://www.tech-assist.org  and select "Lost your Login Info?".
Email Archives:
//www.freelists.org/archives/techassist/

[TechAssist] ADDITIONS: RCA PPR 400 P (VP6X Power Sub PCB)

Other related posts: