Don't have model #,box only.Replaced 95-4134-15 flyback H/O and crx 3412 resolder daughter board interconnect.HV bleeder 4f reads 49.8K. Turn it on get pix and sound B+ to H/O reads 114.8 steady, pix was smeared so I replaced the 120K resisters on all three crt pcbs HV shuts down on bright scenes or if bright and pix are half way on cust adj, set will run at low brightness ok pix looks fine. The flyback is a replacement the diode and H/O are OEM any clue or troubleshooting procedure for this?TIA Country TV Ron Miller 484 FM444 S. Inez,TX 77968-5002 V.(361)782-6419. F.(361)782-9149 e-mail: rlmbkm@xxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/