Ron I had the same problem. I too put another flyback in and got the same thing. I got a rebuilt board because I changed a lot of parts and it still shut off. Those flybacks are not right in my opinion. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 17, 2005 12:36 PM Subject: [TechAssist] 9-1674 Kit still have a problem. RZ56Z83D8 pix pulsates > History: Set came in no HV found shorted flyback HOT and cr3412.Ordered > Kit > from TriTronics installed parts- set came on hv cut off when pix reached > normal brightness. > Posted this problem to group received tip to change RX3015 from 5.6k to > 10k, seemed to work shipped it back to customer. > It's back with system of pulsating ( breathing) at higher contrast or > rapid > changes in brightness. > The 115vdc line is regulating at 114.5, (did try lowering it to 112v same) > connector 4F reads 48.4K ( hv block return ) > RX3234 and RX 3244 were changed also replaced flyback for the second time. > Anyone found out how to fix this problem?tia > > Country TV > Ron Miller > Inez, TX. 77968 > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.298 / Virus Database: 265.6.13 - Release Date: 1/16/2005 > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/