[TechAssist] Re: 2nd Attempt: Sharp TV Model #27L-S180B/SAMS 4231 - Eeprom programming proceedure help needed
- From: <tvservice@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 29 May 2003 13:54:21 -0500
The eeprom for that model is something like RCA
you will need to adjust geometry, gray scale and possible option setting for
model. If you need instruction on this I can supply
Robert
tvservice@xxxxxxxxxxxxx
H & H Electronics Inc
Dallas, TX
----- Original Message -----
From: "Don Cohen" <bond007d@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, May 29, 2003 10:00 AM
Subject: [TechAssist] 2nd Attempt: Sharp TV Model #27L-S180B/SAMS 4231 -
Eeprom programming proceedure help needed
> Hello again!
>
> Is there no one on the list that knows anything about Sharp eeproms -
> whether they need to be programmed somehow or should work out of the
> package? Below is my original post. If I hear nothing back from anyone,
I
> will assume that no one knows and I will leave it at that. My previous
> posts on this set can be searched if you retain emails in your email
> program. If not, and someone needs a history, I can provide that. Much
> thanks to anyone who can possibly float me some info on this.
>
> Sincerely,
> Don Cohen
> DC Electronics
> Shinglehouse, PA
>
>
> ----- Original Message -----
> From: "Don Cohen" <bond007d@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, May 28, 2003 12:28 PM
> Subject: Sharp TV Model #27L-S180B/SAMS 4231 - Eeprom programming
proceedure
> help needed
>
>
> > Hello,
> >
> > This set is the same one that some of you have given me help on. It has
> the
> > no menu and slow channel change problem. I finally ordered a new eeprom
> > from Tritronincs and after putting it in, I get essentially the same
> results
> > as when I leave it out altogether - a blue screen. I do have some other
> > control like powering the set on and off (it initially comes on at plug
> in -
> > doesn't do this with old eeprom), and there seems to be something
> happening
> > when attempting to change channels. But, that is about all. My
question
> > is, does this need to be programmed first in some way, and if so, how do
I
> > do that? I have heard that on some sets you can just piggyback the new
> part
> > on the old one and then remove the old and install the new. Can this be
> done with
> > Sharps? If so, what is the exact proceedure? And, is this even the
> issue,
> > or could I just have a received a bad eeprom? Thanks for any info that
> can
> > be provided.
> >
> > Best Regards,
> > Don Cohen
> > DC Electronics
> > Shinglehouse, PA 16748
> > (814) 697-7800
> > bond007d@xxxxxxxxxxx
> >
> >
>
>
****************************************************************************
*
> The Tech Address Book:
> http://www.tech-assist.org/secure/tip/contact.html
> Add a Repair Tip Here, or Change/Remove your Email Address:
> http://www.tech-assist.org/secure/tip/main.html
> Lost Password:
> http://www.tech-assist.org and select "Lost your Login Info?".
> Email Archives:
> //www.freelists.org/archives/techassist/
*****************************************************************************
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.html
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.html
Lost Password:
http://www.tech-assist.org and select "Lost your Login Info?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
