I think it is also a good idea to have connectors at each motor so a replacement can be made easier (we can solder the wires on to the motor leads to prevent any bad connection there). -----Original Message----- From: team2039-bounce@xxxxxxxxxxxxx [mailto:team2039-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Amber Sent: Friday, January 13, 2012 3:30 PM To: team2039@xxxxxxxxxxxxx Subject: [team2039] Re: The perfect connector I figgured you would have seen it, just making sure. Those will work really well especially since there is no soldering to mess up, and they are relatively cheap, I think everything should be connected using them on the robot (everything power related that is) Sent from my iPhone On Jan 13, 2012, at 3:27 PM, Adam Czerwonka <Adam.Czerwonka@xxxxxxxxxxxx> wrote: > I already ordered it with everything else. > > -----Original Message----- > From: team2039-bounce@xxxxxxxxxxxxx > [mailto:team2039-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Amber > Sent: Friday, January 13, 2012 3:21 PM > To: team2039@xxxxxxxxxxxxx > Subject: [team2039] Re: The perfect connector > > Sorry I forgot to add that they have a special crimper tool, we should get > one of those too. > > Sent from my iPhone > > On Jan 13, 2012, at 12:23 PM, Adam Czerwonka <Adam.Czerwonka@xxxxxxxxxxxx> > wrote: > >> I ordered the 30 and 45 amp connectors and some of the wiring where the red >> and black is attached, and you can pull the two ends apart. >> >> -----Original Message----- >> From: team2039-bounce@xxxxxxxxxxxxx >> [mailto:team2039-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Amber >> Sent: Friday, January 13, 2012 7:50 AM >> To: Roboics Team >> Subject: [team2039] The perfect connector >> >> http://www.powerwerx.com/anderson-powerpoles/powerpole-sets/30-amp-re >> d >> -black-anderson-powerpole-sets.html >> >> From 15 amps to 180 amps >> Cheap >> Simple >> Assembleable >> >> Amen. >> >> Buy some 30 amps >> >> Sent from my iPhone >> >> >> >> *** >> The information in this email is confidential and intended solely for the >> individual or entity to whom it is addressed. If you have received this >> email in error please notify the sender by return e-mail, delete this email, >> and refrain from any disclosure or action based on the information. >> **** >> > > > > *** > The information in this email is confidential and intended solely for the > individual or entity to whom it is addressed. If you have received this email > in error please notify the sender by return e-mail, delete this email, and > refrain from any disclosure or action based on the information. > **** > *** The information in this email is confidential and intended solely for the individual or entity to whom it is addressed. If you have received this email in error please notify the sender by return e-mail, delete this email, and refrain from any disclosure or action based on the information. ****