Ok no problem
See you all at 9 - 9:30
Sent from my iPhone
On Mar 11, 2017, at 12:55 AM, Edward Brown <ebrown555@xxxxxxxxx> wrote:
I thought we had plenty of Alumbrite, and so I joked about bringing elbow
grease instead.
I didn't order the alúmbrate. I ve got plenty of elbow grease and a good
pair of gloves though.
I would've liked to bring something more. Next time I guess.
See ya'll tomorrow,
Edward
On Fri, Mar 10, 2017 at 10:10 PM James Dougherty <jafrado@xxxxxxxxx> wrote:
Hi Folks,
Friday Night Update
- Tomorrow, on Saturday May 11th, we will all meet at Rob's house!
Rob Gong
2502 19th Ave
Kingsburg Ca 93631
559 393-2399
Special thanks to Jimmy Franco for volunteering to haul the trailer!
We plan to meet at Robs around 9:00am
High Level Plan
- Overhaul all of the launch leads (new Gator clips, leads, etc)
- Test launch system, charge batteries
- Service any pads, clean all rails, update with Chris Atteberry's stand-offs
- Eat a great lunch (Mike will send details but we'll be very WELL fed)
- Go through tool-boxes, all items in trailer, organize
- Fix dollys (need to fill tires with foam again)
- Check PA, make sure all is well with fuses and our PA system
- Service Generator
I'm hoping if we have 10-15 people we can get through most of the work
in the morning, eat lunch and then hang out, do show and tell, build
stuff, etc.
Things to Bring
- Alumibrite (Edward and Aaron will bring some)
- Foam for Tires (Aaron)
- White Vinegar (Charles)
- Towels
- Gloves
- Pressure Washer (Rod will bring his or we will use Rob's)
Note: We may make a trip to Harbor Freight or local HW store to get things
if needed.
Things I Will Bring
- Soldering iron/flux/solder
- Connectors
- Wire
- Blowtorch
- Electrical connectors, wire & rework tools
Things still Needed
- Greg will help James with Soldering - any one else who wants to help,
bring your iron
- Volunteer for High pressure sprayer
- Propane Torch gas
Thank you everyone, see you tomorrow!!!
[PLAN BELOW[
-James
CHECKLIST
/* snip */
Trailer
- Empty out, sweep, use compressed air to clean it
- Open up all tables and put boxes on it
- Open boxes and make sure all is sorted properly and matches label
- Clean out trash
- Take out launch system
- Wire all launch system - check batteries and relay
Launch Gear
- The Portapotties - James will have them cleaned, not needed this year.
- The tires on the carts & dollys need to be patched, inflated, and foamed
- Pack Everything in the right box
- Put back in Trailer
Launch Rods/Rails
- All of the rods, pads and rails need to have a bath in :
#1 - White Vinegar - scrub as needed with a scrub-brush
#2 - Alumibrite - spray on, let it sit
#3 - pressure wash (2000 psi or more)
Follow up with grease/WD40 for all threads/rods/fittings, etc
This one takes the most time and where we can really use all the extra
help - anyone who has seen our hardware knows we like everything
squeaky clean.
Launch system
- We need to charge all the batteries.
- We will review the Igniter leads, replace all of the
- ones which are bad.