[tcb] Re: Toe-in
- From: "chuck" <sukchew@xxxxxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Tue, 15 Feb 2011 09:40:18 -0600
Machine! I don't need to stinkn machine!
oleblue
----- Original Message -----
From: Justin
To: tcb@xxxxxxxxxxxxx
Sent: Tuesday, February 15, 2011 9:37 AM
Subject: [tcb] Re: Toe-in
There are 60' or 60 minutes in 1 degree. This is how the Germans measured
angles. It's In the Bentley manual as well. If he were aligning the vehicle on
a machine those are the specs. It appears he is using a measuring tape
Sent from my iPhone
On Feb 15, 2011, at 9:23 AM, "Denis Dodson" <coocoo@xxxxxxx> wrote:
He needs the toe-in to last for more than 15 minutes, much less 8 and you
would shoot for 5? That wouldn’t even get him out of his driveway! Why work on
your bus if it’s only going to last, at most 15 minutes. I am an idiot, and
most of the repairs I do last longer than that.
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Justin Wilt
Sent: Tuesday, February 15, 2011 9:20 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Toe-in
My alignment machine shows total toe of 15' (15 minutes) Which would be 8'
of tow in on each side maximum. I would shoot for 5.
On Tue, Feb 15, 2011 at 9:15 AM, sammie smith
<bugcollections@xxxxxxxxxxxxx> wrote:
I can look up the exact # Chuck, but I aim for 1/8" when I set mine
on all of the AC VWs.
--- On Tue, 2/15/11, chuck <sukchew@xxxxxxxxxxxxxx> wrote:
From: chuck <sukchew@xxxxxxxxxxxxxx>
Subject: [tcb] Toe-in
To: tcb@xxxxxxxxxxxxx
Date: Tuesday, February 15, 2011, 9:10 AM
Does any one know what the toe-in is supposed to be on a splitty?
oleblue
--
Justin Wilt
Technician
Post Oak Motorcars
Rolls Royce Motorcars Houston
Bentley Houston
1530 West Loop South
Houston TX 77095 USA
+1-713-850-1530
+1-713-539-4419
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3445 - Release Date: 02/15/11
07:34:00
Other related posts:
