Hello David,
Thanks for sending those files. I’ve added the ones that we didn’t already have
to the resource
(https://drive.google.com/open?id=1XjV_2G8_5Z367LAJC1Udw91PGhwjkqg- ;
<https://drive.google.com/open?id=1XjV_2G8_5Z367LAJC1Udw91PGhwjkqg->).
I’m a Cubase/Nuendo & occasional Protools Tango 2 user, so I can’t help much
for a Tango 1 with Pyramix, but from what I’ve heard Tango 1 was supposedly
very well integrated with Pyramix, so such an annoying issue seems surprising…
I would think there would be a solution to this problem. Are you using the
“latest” firmware/software & Netsmart? Maybe another user with this setup can
help?
J
Jérôme Heiderscheidt
Studio Ubik
Audiovisual production // Sound recording studio
Boulevard Barthélémy, 11
1000 Brussels
Tel: +32 (0) 2 5029795
Mob: +32 (0) 497 825804
www.studio-ubik.com
facebook.com/studio.ubik
vimeo.com/studioubik
On 30 Dec 2018, at 05:48, David Perry <dpperry49@xxxxxxxxx> wrote:
Hello Jerome,
I am attaching all the Tango files I have. You will have to sort them out. I
hope you can share some of them.
I've just recently tried to get my Tango 1 to work. I have always had an
issue with Pyramix that the faders, after using them for a short while, will
snap to the top. The fader does not change in Pyramix but if you touch it
again it will first snap to the top of the fader in Pyramix before I can then
use it. Have you ever heard of this issue? It has troubled me since I first
bought the Tango 1.
TangoFirmwareUpgrade_20090311.pdf
<https://drive.google.com/file/d/1oaOhYlMJ6XdsdcFIQ__rv-suebihJMfW/view?usp=drive_web>
TangoInstallGuideLogic_20090515.pdf
<https://drive.google.com/file/d/18OeQkqnzDA3bpwucu1h0isGNis_4QP03/view?usp=drive_web>
TangoInstallGuideNuendo_20090515.pdf
<https://drive.google.com/file/d/1zA3zY8_aiOC3aEZvjLSZg2ZmXU5xtSZ5/view?usp=drive_web>
TangoInstallGuideProTools_20090515.pdf
<https://drive.google.com/file/d/1cq-fkZGlMJXnXme1xQD6L9dPi49oPEEu/view?usp=drive_web>
TangoInstallGuidePyramix_20090515.pdf
<https://drive.google.com/file/d/1uTdpaIcbmWpcZCyUgEaksSuCyztNFc1c/view?usp=drive_web>
TangoOperationManualForLogic2.3.4_20090514.pdf
<https://drive.google.com/file/d/17rAVK0FsJf2ruMZF7x1TCnMmagf1nUJ2/view?usp=drive_web>
TangoOperationManualForNuendo2.3.4_20090514.pdf
<https://drive.google.com/file/d/1Jiswo7HwCCarcC9S4KiQ-GI4-C1fvrMk/view?usp=drive_web>
TangoOperationManualForProTools2.3.4_20090514.pdf
<https://drive.google.com/file/d/15gk6Bz2F2w6tyFqAlgOpvvjurtT2d1n1/view?usp=drive_web>
TangoOperationManualForPyramix2.3.4_20090514.pdf
<https://drive.google.com/file/d/1YuYpeXCPh321VoeyU4hIDrH-tkp-KaLm/view?usp=drive_web>
TangoReleaseNotes_2.3.4.503.pdf
<https://drive.google.com/file/d/1A3VfwIkzrV-G59-f9vYnlUoi4-GrsvWw/view?usp=drive_web>
TangoSetupGuide_Audient_20090515.pdf
<https://drive.google.com/file/d/1sYR1rS7h_TeuupIco8J7dP_zXYEZM63R/view?usp=drive_web>
Thank you for the Tango freelist. It was quite helpful.
On Sat, Dec 29, 2018 at 12:47 PM Jérôme Heiderscheidt <jerome@xxxxxxxxxxxxxxx
<mailto:jerome@xxxxxxxxxxxxxxx>> wrote:
Hello Gabor,
I’ve been building a resource with all Tango related files I collected over
the past years. There’s more Tango 2 stuff as I’m a Tango 2 owner, but
there’s also Tango 1 stuff (but no disk image) :
https://drive.google.com/open?id=1XjV_2G8_5Z367LAJC1Udw91PGhwjkqg- ;
<https://drive.google.com/open?id=1XjV_2G8_5Z367LAJC1Udw91PGhwjkqg->
I’m sure someone still has Tango 1 images that they can share with you. In
this case, please also send these to me so I can add them to the resource.
Best wishes,
Jerome
Jérôme Heiderscheidt
Studio Ubik
Audiovisual production // Sound recording studio
Boulevard Barthélémy, 11
1000 Brussels
Tel: +32 (0) 2 5029795
Mob: +32 (0) 497 825804
www.studio-ubik.com <http://www.studio-ubik.com/>
facebook.com/studio.ubik <http://facebook.com/studio.ubik>
vimeo.com/studioubik <http://vimeo.com/studioubik>
On 29 Dec 2018, at 17:42, Csorvási Gábor <Csorvasi.Gabor@xxxxxxx
<mailto:Csorvasi.Gabor@xxxxxxx>> wrote:
Dear All,
I am Gabor Csorvasi cheef engineer of Mupa Budapest Ltd.
We have a Tango1 3-bay controller system with SN: 01546, 01178, 01807.
Is any software version still available somewhere?
The HDD in the active extension bay was damaged. Is it available any image
or system backup for it?
Thank you for your help!
Best regards,
Gabor
---
Ezen üzenet és annak bármely csatolt anyaga bizalmas, jogi védelem alatt
áll, a nyilvános közléstől védett. Az üzenetet kizárólag a címzett, illetve
az általa meghatalmazottak használhatják fel. Ha Ön nem az üzenet címzettje,
úgy kérjük, hogy telefonon, vagy e-mail-ben értesítse erről az üzenet
küldőjét és törölje az üzenetet, valamint annak összes csatolt mellékletét a
rendszeréből. Szigorúan tilos az üzenet és mellékletei jogosulatlan
másolása, terjesztése, valamint az abban foglalt információ közlése és
bárminemű felhasználása, valamint bármely egyéb a levél tartalmán alapuló
jogosulatlan közlés.
This message and any attachment are confidential and are legally privileged.
It is intended solely for the use of the individual or entity to whom it is
addressed and others authorised to receive it. If you are not the intended
recipient, please telephone or email the sender and delete this message and
any attachment from your system. Please note that any dissemination,
distribution, copying or use of or reliance upon the information contained
in and transmitted with this e-mail by or to anyone other than the recipient
designated above by the sender is unauthorised and strictly prohibited.
