[tangousers] Re: Test Message

  • From: Tony Gort <tonygort@xxxxxxxxx>
  • To: tangousers@xxxxxxxxxxxxx
  • Date: Thu, 23 Feb 2017 11:05:46 -0800

I had also two sticks fader and had ordered two new spares from SmartAV when I 
ordered my extension unit, They suggested spraying them before replace them 
which I did. it worked and they have been fine ever since. i have two spare now 
for when I do need them since our friends are no longer around.

check ebay, I see them for around $25 each, no use selling your expensive Tango 
just because of a few stick fadesr that can be fixed so easy

Good luck!

Tony


Tony

On 2017-02-23, at 10:56 AM, peregrine andrews <pez@xxxxxxxxxxxxxx> wrote:

I haven't tried spraying them, no. I guess that's the first thing to try. 
And good to know the replacements are available and not a total pain to fit.
Thank you!
P.


Peregrine Andrews
Moving Air
Audio Production
tel 07976 267154
www.moving-air.com
IMDB
AMPS
@pezzatronic

On Thu, Feb 23, 2017 at 6:36 PM, Tony Gort <tonygort@xxxxxxxxx> wrote:
You should be able to order the fader from Alps ,  ( see part number below) 
replacing it is not to bad of a deal. have you tried carefully spraying the 
fader rails with some NU TROL Control cleaner?

Tony


<2017-02-23 10.33.46.jpeg><2017-02-23 10.32.31.jpeg>

On 2017-02-23, at 10:09 AM, peregrine andrews <pez@xxxxxxxxxxxxxx> wrote:

Hi,

Two sticky faders. That's still an issue - I have to give them a tap to make 
them show the right position. That's become a show-stopper. Also, I'd now 
like to be able to use it with Pro Tools and maybe Reaper, as well as 
Nuendo. I also have a Euphonix artist MC. No way as beautiful, but currently 
more usable than the beloved Tango. So, anyone on the market for a Tango 1 
with two misbehaving faders? Or should I keep the faith....if I could fix 
the faders that would be a start.

Cheers

P.


Peregrine Andrews
Moving Air
Audio Production
tel 07976 267154
www.moving-air.com
IMDB
AMPS
@pezzatronic

On Thu, Feb 23, 2017 at 4:51 PM, John <hodgkinson.john@xxxxxxxxx> wrote:
Can't solve your problem but you are reaching the group

When in doubt............Seduce!

On Feb 23, 2017, at 10:42 AM, John McClain <john@xxxxxxxxxxxxxxxxxxxxx> 
wrote:


Received.

John McClain
The Dog and Pony Show
@DnPSound
3395 S. Jones Blvd. #328
Las Vegas, NV 89146
702-252-0251 Land
702-252-0265 Fax
702-612-3098 Mobile
John@xxxxxxxxxxxxxxxxxxxxx
www.dogandponystudios.net

On Thu, Feb 23, 2017 at 7:33 AM, peregrine andrews <pez@xxxxxxxxxxxxxx> 
wrote:
Can any Tango users reply so I know this is reaching the group? I've sent a 
few messages before and had no replies.

Cheers

Pez

Peregrine Andrews
Moving Air
Audio Production
tel 07976 267154
www.moving-air.com
IMDB
AMPS
@pezzatronic




Other related posts: