here's a pic of the screen
On Wed, Jan 13, 2021 at 1:19 PM Jan Willems <jwillems5@xxxxxxxxx> wrote:
Hello,
I fixed my touch screen problem by following all the steps in the service
manual for the upper module
I took the screen out, cleaned it and put it all back together without too
much force on the screws and nuts (they were really tight so i suspect
there was too much pressure on the touch screen)
Now it's all good, i made some pics for those interested in the repairs
So if anyone has touch screen issues that won't go away after calibration
it probably is dirty or too tight in the case
Jan
On Wed, Jan 13, 2021 at 1:11 PM Jan Willems <jwillems5@xxxxxxxxx> wrote:
Hello,
I fixed my touch screen problem by following all the steps in the service
manual for the upper module
I took the screen out, cleaned it and put it all back together without
too much force on the screws and nuts (they were really tight so i suspect
there was too much pressure on the touch screen)
So now it's all good, i made some pics for those interested
So if anyone has touch screen issues that won't go away after calibration
it probably is dirty or too tight in the case
Jan
On Wed, Jan 13, 2021 at 10:01 AM Ludger Mias <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
Hi Jan,
I just tried what you show in your video with Logic Pro X 10.4.3 on a
Mac OS Mojave 10.14.6. Everything works fine. I am afraid I can’t help you
with this.
Ludger
Am 08.01.2021 um 14:38 schrieb Jan Willems <jwillems5@xxxxxxxxx>:
Hi All,
Tried cleaning the screen today but the problem remains:
As you can see in my video I can touch the favourites button (the star)
perfectly (and also everything that is on the left side of this line)
Check the wetransfer link (couldn't upload the video in this mail,
strange because i was pretty sure it was under 25 MB ..anyway here's the
link)
https://we.tl/t-V4NVoSJv8X
But if I try to touch the next page button there is no touch input
-sometimes it does nothing
-sometimes it gives me the system dialog
-sometimes it activates the panner (which is strange because this is on
the far left of the screen)
So the most of the screen is working but a small part on the right is
not. I had this once before and then cleaning the sides with compressed air
worked, but now this is not the case
If anybody has had this happen before I sure could use some help!
Thanks for the help,
Jan
(sorry if maybe this message was sent multiple times, i had some issues
attaching the video)
Attachment:
IMG_8283.jpeg
Description: JPEG image
