Hello John,
Here is a link to all Tango related files we could put together :
http://www.studio-ubik.com/TangoResource/ ;
<http://www.studio-ubik.com/TangoResource/>
If anyone has any interesting Tango files that are not included in this link,
please send them to me and I will add them !
J
Jérôme Heiderscheidt
Studio Ubik
Audiovisual production // Sound recording studio
Boulevard Barthélémy, 11
1000 Brussels
Tel: +32 (0) 2 5029795
Mob: +32 (0) 497 825804
www.studio-ubik.com <http://www.studio-ubik.com/>
facebook.com/studio.ubik
vimeo.com/studioubik
On 8 Nov 2019, at 15:24, John McClain <john@xxxxxxxxxxxxxxxxxxxxx
<mailto:john@xxxxxxxxxxxxxxxxxxxxx>> wrote:
Hello! I have recently switched to Windows, can anyone share the Tango 2
software and Netsmart for Windows 10? Thank you!
John McClain
The Dog and Pony Show
@DnPSound
3221 W. Tompkins Avenue
Las Vegas, NV 89103
702-252-0251 <tel:702-252-0251> Land
702-252-0265 <tel:702-252-0265> Fax
702-612-3098 <tel:702-612-3098> Mobile
John@xxxxxxxxxxxxxxxxxxxxx <mailto:John@xxxxxxxxxxxxxxxxxxxxx>
www.dogandponystudios.net <http://www.dogandponystudios.net/>
On Fri, Nov 8, 2019 at 2:48 AM, Chris Palmer <chrispalmer3000@xxxxxxxxx
<mailto:chrispalmer3000@xxxxxxxxx>> wrote:
Hi Luster,
I know nothing about Logic and MacOS as I use Nuendo on Windows-10, but is it
possible that a resent Logic update is causing the problem?
Can you go back and try an earlier version?
I notice that the Sassi, Iggy and Netsmart version numbers you are using are
not the same as the ones I have, but perhaps the MacOS and Windows final
versions have slightly different numbers.
I have:
Sassi and Iggy 3.3.0.18
Netsmart 3.2.4.3
So maybe it is a version issue, i'm not sure.
Chris.
On Thu, 7 Nov 2019, 22:47 Ludger Mias, <dmarc-noreply@xxxxxxxxxxxxx
<mailto:dmarc-noreply@xxxxxxxxxxxxx>> wrote:
Iggy software build number 3.3.0.11
Sasse the same
Consolemon 3.2.5.1
I updated logic from 10.4.5 to 10.4.6 and now to 10.4.7
Am 07.11.2019 um 23:35 schrieb Chris Palmer <chrispalmer3000@xxxxxxxxx
<mailto:chrispalmer3000@xxxxxxxxx>>:
Netsmart is nothing to do with Protocols.
Which ConsoleSoft version are you using on the T1?
Have you updated Logic recently?
On Thu, 7 Nov 2019, 19:59 Ludger Mias, <dmarc-noreply@xxxxxxxxxxxxx
<mailto:dmarc-noreply@xxxxxxxxxxxxx>> wrote:
Has anyone experience with this configuration?
As soon as I connect my Tango 1 via Netsmart 3.2.4.0 Logicpro crashes. The
other way round I can connect my Tango 1 via Netsmart, but then trying to
start Logic Pro it crashes before opening.
Protools works, so it shouldn’t be an issue of Netsmart.
