reason i thought to put it inside the motor is because there would be a
lower fire risk as all the burning material is already inside a fire proof
case (the motor) and it is pretty much guaranteed to ignite
Nikolai Nielsen
On Mon, 30 Nov 2020 at 17:47, Jon Cherba <joncherba@xxxxxxxxx> wrote:
I was trying to formulate a colored smoke mix that could be added to or
replace the delay portion of the motor. Case length may have to change due
to the burn time of the mix. I can try and dig up my notes on my mixture.
It's been a few years since I've messed with it. I may have to mess with it
again since there is some interest in it.
On Mon, Nov 30, 2020, 9:42 AM Richard Nakka <richard.rocketry@xxxxxxxxx>
wrote:
Nikolai,
I don't see why not, with proper design. Although it is probably better
to have the smoke grain external to the motor.
Richard
On Sun, Nov 29, 2020 at 4:46 PM Nikolai Nielsen <
nielsen.nikolai86@xxxxxxxxx> wrote:
Richard, what do you think the feasibility of putting a smoke charge
inside a large sugar motor for long smoke tracking to near the ground?
Nikolai Nielsen
