Ceramic wool rigidized w/ satanite, itc100, or similar? There's many
flight and/or landing profiles this wouldn't work for.
On Wed, Oct 31, 2018, 11:14 AM Nikolai Nielsen <nielsen.nikolai86@xxxxxxxxx
wrote:
Hi, i need some help. Im the rocket i am currently working on, i want to
put a long duration burn smoke device into the body of the rocket and
manually light it just before take off so that should something go wrong
and i lose sight of the rocket, i can find it by the copious amounts of
smoke it will be giving off. The smoke device is a 15cm long copper pipe
filled with the ledgendary smoke mix which burns for about 2 minutes. The
problem is that this tube gets extremely hot and will set fire to the
rocket uf it touches the body, to remedy this i will need something that
can be shaped around the tube, wont catch fire or be damaged by high heat
and is a good insulator. It also needs to be light weight. Ive comr to you
guys to help me name this material-x. Ive included a diagram of what the
set up would look like. Any help would be greatly appreciated.
