Rob, this is even better, but one does have to remember that the command is relative to where the cursor is located when you issue the command. So, If you want to go exactly 3 hours into a file, you need to press alt plus right arrow while the file is stopped. -----Original Message----- From: studiorecorder-bounce@xxxxxxxxxxxxx [mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of ROB MEREDITH Sent: Thursday, January 25, 2007 9:04 AM To: studiorecorder@xxxxxxxxxxxxx Subject: [studiorecorder] Re: Navigating a file There are two commands, alternate rewind and alternate forward, which allow you to set the time of movement. (Actually there are a lot of ways to do this in SR, but we'll use these two commands.) Use Alt+Left Arrow to move back, and Alt+Right Arrow to move forward. You can control the time these commands move in the general page of the settings dialog. Rob Meredith >>> milamj@xxxxxxx 01/25/07 08:39AM >>> Hi Rob, If my file is 7 hours long, I would like to navigate through it by hour. In other words, when I press the control+pagedown or control+page-up, I would like for Studio to navigate one hour backwards or ahead depending on the keystroke. I tried to set the navigation setting to 1 hour, but it wouldn't allow me to do this. I could use the "goto time" command, however, I have to enter an hour every time. How can I navigate the file in hour incruments with a keystroke? Jonathan