I'm in!
On Fri, Dec 14, 2018, 6:52 PM Andy Meysner <meysner@xxxxxxxxxxxx wrote:
Hi all,
Just a reminder to let me know by tomorrow at the latest if you wish to
participate in this build. Those who have already replied, no need to
reply again.
At our membership meeting last Sunday, we suggested that the workshop
date we have planned for the morning of February 10, 2019 could be a
build of an 18" foam delta (Rick's Delta) that is regularly flown
indoors by the Brant Flyers and some of our own members.
Attached are a sketch and photo, and here is video of this delta.
https://www.dropbox.com/s/tkd3pukvlm2meor/Ricks%20Delta%20Video.mp4?dl=0
I can personally vouch that this little foam delta is an absolute blast
to fly. It is also quite durable and easy to repair. Although I have
only flown it indoors, I see no reason why it would not also fly well
outside on a relatively calm day.
We have received a quote from Paris Junction Hobbies for a group buy
(minimum 8) of the electronics for this delta of $53. The cost of the
foam is ~$2. So the total cost of the plane inc. HST would be less than
$65.
Note that if interested in building and committing to this, it would not
be essential to attend the workshop. There will be plenty of advice
available if needed to complete it. To fly this you will need a 2.4GHz
Spektrum or compatible radio, just 3 channel.
If you are interested in this build and prepared to commit ~$65 to it,
please confirm by return email by Saturday December 15th. The reason for
the relatively quick reply is to ensure obtaining the electronics prior
to February 10th.
Thanks, Andy
