On the SmartVision 2, granularity is altered by using the star key with 1 or 2,
then using the arrow keys to go character by character, or word by word,
depending on what you have chosen to read by. I can't verify if this isathe
same on the SV1, but worth a try.
On 5 Oct 2017, at 4:14 pm, Peter Scanlon
<scanno@xxxxxxxxxx<mailto:scanno@xxxxxxxxxx>> wrote:
I’m fairly sure there is a way, but it’s a long time since I used it and it was
not so easy. The manual is useless giving no info on this I could find in the
Email area.
Suggest you write to the Kapsys in France.
P.
From:
smartvisionau-bounce@xxxxxxxxxxxxx<mailto:smartvisionau-bounce@xxxxxxxxxxxxx>
[mailto:smartvisionau-bounce@xxxxxxxxxxxxx] On Behalf Of Doug Rupe
Sent: Thursday, 5 October 2017 1:46 PM
To: smartvisionau@xxxxxxxxxxxxx<mailto:smartvisionau@xxxxxxxxxxxxx>
Subject: [smartvisionau] ? re reading messages
Greetings all.
Is there a way to read character by character in a message to obtain the
correct spelling of a name or word on a first generation kapsys?
Thanks.
Doug.
