If you boot from the SLINT installation image is grub-install found?
The command "lsblk" will give you the disks and partitions in your system.
Usually you have /dev/sda and one of the partitions is SLINT.
You can tell which because the file type is usually ext4 file type and it's
usually the last partition you made like /dev/sda3 or /dev/sda4.
You will also see your installation image listed. Like /dev/sdb with
partitions /dev/sdb1.
Boot from the SLINT installation image, issue command "lsblk", confirm what
disk is being used, usually /dev/sda.
You want to run grub-install and tell the drive you want grub on.
If the disk being used is /dev/sda which it usually is, issue the command:
"grub-install /dev/sda" which will install grub to that hard drive MBR. You
do NOT want to install to a partition like /dev/sda1, you want to install
to /dev/as a.
Once you are running SLINT we can make sure you have Windows recognized by
running "grub-mkconfig -o /boot/grub/grub.cfg" from the working
installation of SLINT".
I hope that helps.
Best wishes,
David
On Sat, Mar 5, 2022, 12:29 AM 高生旺 <coscell@xxxxxxxxx> wrote:
Hello Ring,
Now I can only boot to Windows not slint. If I boot to slint booting image
then grub command not found.
On Sat, 5 Mar 2022, 高生旺 wrote:
Date: Sat, 5 Mar 2022 11:08:27 +0800 (CST)to
From: 高生旺 <coscell@xxxxxxxxx>
To: slint@xxxxxxxxxxxxx
Subject: Re: [slint] Re: How to produce Dual system booting menu?
Thank you Ring!
I booted from slint image and run os-prober.
Shuld I need to change the path of grub-mkconfig -o command?
On Fri, 4 Mar 2022, D.J.J. Ring, Jr. wrote:
Date: Fri, 4 Mar 2022 10:20:23 -0500
From: "D.J.J. Ring, Jr." <n1ea@xxxxxxxx>
Reply-To: slint@xxxxxxxxxxxxx
To: slint@xxxxxxxxxxxxx
Subject: [slint] Re: How to produce Dual system booting menu?
As root run:
os-prober
It should find your other operating system, if os-prober is not found,
install it, then run os-prober.
Then run as root:
grub-mkconfig -o /boot/grub/grub.cfg
Reboot.
Be well,
David
On Fri, Mar 4, 2022 at 9:53 AM 高生旺 <coscell@xxxxxxxxx> wrote:
My new installation didn't produce dual system booting menu. How
produce
it manually?
===============================================================================
withThe Slint mailing list.
Archive: https://www.freelists.org/archive/slint
To subscribe or unsubscribe, email slint-request@xxxxxxxxxxxxx
receive.the subject
'subscribe' or 'unsubscribe', then answer the email you will
orMore: email slint-request@xxxxxxxxxxxxx with as subject 'help'
'commands'.