Hi dan, At first, all was the same. But after I did a couple of restarts and 1/2 computer reboot(s), all started to worik very well; instant reaction and no "stop plug-in" dialogue, while set to U.K. English. Now there is to see whether this is permanent or no. Thanks for your help. Cheers Vytautas -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Rugman Sent: 1 octobre 2008 18:18 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: the switch keyboard language solution Hi Vytautas, It sounds like you're experiencing two different problems. The first isn't a problem, its just the way you're system works. There's obviously a difference between your US input language and UK input language which is causing the GRAVEACCENT keystroke to change between each setting. If you find that the message being spoken as you navigate is always the same then the GRAVEACCENT keystroke is wrong and Sibelius isn't recognising it. From what you're saying, it sounds as though you have to have UK English set as the input language. The second problem is more serious and might be related to system performance. The stop plug-in dialog appears whenever any plug-ins are running. It is there so that users can cancel a plug-in which is taking too long to run, or if the plug-in has been badly written and there is no obvious way to get rid of it. I'm surprised that you're noticing it though. If JAWS is actually focusing on it, then it must have been there for a long time. Well - long in computing terms. The plug-in is not one which takes a long time to complete. I tested it extensively to make sure that it would not slow Sibelius down and that dialog should very rarely be spoken. I'll need to check out a few things in the code before I can give you any solid suggestions but there is something you could do to give me an idea of how slowly the plug-in is running. Press Alt+U to open the plug-in menu. Go to the Access sub-menu (this should be the first menu item). Choose the item called "Access" and press enter. This will trigger the plug-in to run without passing the keystroke first. Try it a few times and let me know what happens. Dan Rugman Visit www.musicaccess.co.uk The new on-line resource for visually impaired musicians and home of Sibelius Access. If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx