Ah, you've found the big one. Unfortunately, there is a conflict between JAWS and the playback devices dialog which is proving extremely difficult to work around. You should be able to use the JAWS cursor to move to the configuration you want and then do a left mouse button to select it. You must be very careful after this to close the dialog using the JAWS cursor as well. If you try tabbing round this dialog then you could kill Sibelius. I'm going to take another look at this next week, but I'm not that hopeful. Sibelius are aware of this problem but we'll have to work around it for now. Dan Rugman Visit www.musicaccess.co.uk The new on-line resource for visually impaired musicians and home of Sibelius Access. -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Gibbs Sent: 12 September 2008 19:59 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Selecting playback configurations Is there a way to select playback configurations? You can't simply highlight the playback configuration field and scroll through as JAWS suggests you should be able to do. If you try that, when you down arrow through the list, you end up selecting the next thing you highlight. If you do that in a score that already exists, you might freeze Sibelius. That's happened to me several times. In addition, routing JAWS to PC and then routing PC to JAWS will open the list of options. However, arrowing and selecting one will cause you to lose focus in the playback devices window, which focus cannot be regained, it appears. Thoughts? Kevin If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx