[sib-access] Re: Question about Bar Numbering
- From: Dani Pagador <axs.brl@xxxxxxxxx>
- To: sib-access@xxxxxxxxxxxxx
- Date: Thu, 27 Nov 2014 10:03:24 -1000
Um ... I'm starting with a totally blank score and need the measure
numbers to start at 46 as opposed to 1.
Will go read the manual some more and look at the Avid site for plug-ins.
Thanks,
Dani
On 11/27/14, Kevin Gibbs <kevjazz@xxxxxx> wrote:
> You probably have to put a start repeat bar at 5:45. Then, put a and repeat
> bar at the end of the repeated section. See if that works.
>
> Sent from my iPhone
>
>> On Nov 27, 2014, at 10:18 AM, Dani Pagador <axs.brl@xxxxxxxxx> wrote:
>>
>> Hi, Everyone.
>> Will be working through this Thanksgiving weekend, so know that it
>> won't be a relaxing one. Hope everyone else celebrating Thanksgiving
>> will be able to enjoy the holiday.
>>
>> How do I have my piece start at a number other than 1 or 0? I have to
>> reduce a section that starts at 45 and need the bar numbers to reflect
>> this. Ideas?
>> Thanks,
>> Dani
>> If you wish to unsubscribe, send a blank message
>> with the single word, unsubscribe - in the Subject line to:
>> sib-access-request@xxxxxxxxxxxxx
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
