[sib-access] Re: (No Date: Mon, 13 Oct 2014 09:04:40 -0400
- From: "Alexandru Cozaciuc" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "alexcoza@xxxxxxxxx" for DMARC)
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Wed, 15 Oct 2014 19:05:24 +0300
If you want to put a flat above a trill line, you can do the following:
1. Select the trill line.
2. Open the symbols list by pressing the letter z, and then go to the row
called accidentals 1.
3. After that, press the right arrow multiple times to get to the flat
symbol, press the Space bar to select it, press the Tab key once and choose
the radio button called normall if it isn't chosen yet, press the Tab key
once again to go to another radio button called staff. If Jaws says system
in stead of staff, press the Up arrow key to choose the radio button called
staff, press the Tab key untill you hear "OK" and press Space.
Unfortunately, you will need a sighted person to position the trill and the
flat correctly because they may overlap.
To make a trill play back correctly, select it first, press
Control+Windows+Tab, press Control+Tab untill you get to the Play back
button, press the Space barr to press it if Jaws says "not pressed" and
press Shift+Tab untill Jaws says "diatonic trill". This checkbox is checked
by default, so uncheck it by pressing the Space bar. After that, you'll be
taken back to the score window.
That's all!
Hope this helps
Alex
-----Original Message-----
From: Dale Lieser
Sent: Monday, October 13, 2014 4:05 PM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: (No Date: Mon, 13 Oct 2014 09:04:40 -0400
As I recall, that takes sighted assistance. Also, in order for Sibelius to
play it back correctly, there is an adjustment to be made from within the
Playback window, separate from the visual notation.
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of mohammad mohajer
Sent: Monday, October 13, 2014 8:57 AM
To: sib-access
Subject: [sib-access]
how can we write half tone trill in sibelius if i put trill gine in c
it play c d c d c d. but i want to put a sharp or flat on trill line
that play c d flat c d flat.
--
!!!!
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
