Kevin, Thanks for the quick response! So I'll just go and get Sibelius 5.2, until things progress forward. Thank you, and sorry for asking the question that you probably have answered ten thousand times before. :-) ----- Original Message ----- From: "Kevin Gibbs" <kevjazz@xxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Monday, May 03, 2010 11:40 PM Subject: [sib-access] Re: Introduction and a Question > Not yet. Be patient. > > > -----Original Message----- > From: sib-access-bounce@xxxxxxxxxxxxx > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Parham Doustdar > Sent: Monday, May 03, 2010 2:07 PM > To: sib-access@xxxxxxxxxxxxx > Subject: [sib-access] Introduction and a Question > > > Hi all, > I found Sibelius Access today, and it appears it is going to make one of > my > wishes come true; using EWQL symphonic orchestra, or Xsample Chamber > Ensemble. > > It appears that the soundsets created for it (which make using Kontakt > Player not needed anymore) are only for Sibelius 6.0 and above. Is it > possible to use these scripts with Sibelius 6.0? > > Thanks! > Parham Doustdar, from Iran. > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx