[SI-LIST] Re: simulation with a connector
- From: LiHui <lihuizju@xxxxxxxxx>
- To: Shao, Peng <Peng_Shao@xxxxxxxxxx>
- Date: Thu, 21 Mar 2013 20:48:36 +0800
Hi Shao, Peng Shao:
Yes, I'm in China. Please tell me the book name so I can buy it. Thanks.
Best Regards!
--------------------------------------------------------------------------------
>Lihui，
>If you are in China. I published a book in Chinese on SI/PI methodology and
>practice, which could be your reference. Also the book tell you how to use
>HyperLynx. You may find it in book store or contact me directly.
>
>Peng Shao
>
>在 2013-3-14，11:35，"李晖" <lihuizju@xxxxxxxxx> 写道：
>
>> Hi All£º
>> Sorry to all seems the coding was wrong in last mail. Send again.
>> I'm a newbie trying to learn SI simulation with tools such as
>> Hyperlynx, Allegro SI. Where can I find the training docs which would
>> help me to get a quick start? Except the help docs, which I've already read
>> them all. Maybe I need some simulation examples which would teach me step
>> by step.
>> I'm trying to use Allegro SI to do SI simulation.
>>
>> I have a board in my hand has a USB controller on it. There is a Mini
>> USB receptacle on the board too used to connect this USB controller to USB
>> host. It's a simple topology of a USB design. My question is can I use
>> Hyperlynx or Allegro SI to do a simulation about this board? I think a
>> driver and a receiver is a must in the simulation , am I right? A
>> connector seems can not be a receiver. I've got the IBIS model of the USB
>> controller and the model of the receptacle whose suffix is ebd/icm(I got
>> two models of the receptacle, ebd can be transferred to dml model used in
>> allegro si). If the simulation can't be done in this topology, how can I
>> simulate it?
>> Another question is there is a EMI filter between the controller and
>> receptacle, I can NOT assign its model to the filter. The model's suffix is
>> S4P, which is a S-parameter model of the filter. What's the correct
>> procedure to assign such a model to component?
>> Any advices are valuable to me. Pls kindly give me your advices. Thanks
>> all.
>> Best Regards!
>>
>> ------------------------------------------------------------------
>> To unsubscribe from si-list:
>> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>>
>> or to administer your membership from a web page, go to:
>> //www.freelists.org/webpage/si-list
>>
>> For help:
>> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>
>>
>> List forum is accessible at:
>> http://tech.groups.yahoo.com/group/si-list
>>
>> List archives are viewable at:
>> //www.freelists.org/archives/si-list
>>
>> Old (prior to June 6, 2001) list archives are viewable at:
>> http://www.qsl.net/wb6tpu
>>
>> ------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
