[SI-LIST] impedance question
- From: Mustafa Özgür TUTUM <mustafa.tutum@xxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Fri, 21 Mar 2008 14:13:59 +0200
Dear all,
I think, I misunderstood smt about impedance tolerance.
Which one is tighter? Which one is harder to control? 50 Ohm +/- 5% or 50 Ohm
+/- 10 %. I have read that 10% is much tighter and hard to control. I could not
understand the reason.
Thanks for your interest.
System Design Engineer
Vestel Digital Company
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
