sorry, using hspice ver 2003.03..this last bit might be of importance ! -bp bpanos wrote: > drawing a blank here... > performing a transient analysis, how do I set the output so I gather > data to plot (print) from specific time interval? (say I wan the voltage > output from 10ns to 50ns, where my actual transient input runs from 0 to > 100ns). Do I use the .meas fnc? > thanks > Bill > > -- Binary/unsupported file stripped by Ecartis -- > -- Type: text/x-vcard > -- File: bill.panos.vcf > -- Desc: Card for bpanos > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > -- Binary/unsupported file stripped by Ecartis -- -- Type: text/x-vcard -- File: bill.panos.vcf -- Desc: Card for bpanos ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu